Water in the Frame - Faraday Bikes

Water in the Frame

 

From time to time your bike may be exposed to conditions that could lead to water pooling in the frame.  Since prolonged exposure to water can cause damage to the internal electronics we recommend doing the following to drain any water that may be caught inside the frame:

 

Procedure:

Step 1 Locate the rubber port on the bottom bracket near the rear wheel

Step 2 Release the plug by lifting up the top of the tab

Step 3 This will allow this plug to flap open and drain any water that may be sitting inside the frame

Step 4 Close the tab before riding the bike again