Front Rack Install - Faraday Bikes

Front Rack Install

Install Guide

 

Tools Needed:

  • 4mm hex key

 

Procedure:

Step 1 Place the two cables in the notches on the cable guides. Flush the rack mount against the frame and slide down until it stops.


Step 2 Gather all the cables and thread them though the rack ends. Insert the rack ends into the mount.


Step 3 Install and tighten the head tube screw


Step 4 Install and tighten the cap screws (E), and set screws (F)

 

Front Rack Install.pdf

1 MB  .  Download